|.17 Hornady Mach 2|
Left: .17 HM2, Right: .17 HMR
|Place of origin||United States|
|Parent case||.22 Long Rifle|
|Bullet diameter||.172 in (4.4 mm)|
|Neck diameter||.180 in (4.6 mm)|
|Shoulder diameter||.226 in (5.7 mm)|
|Base diameter||.226 in (5.7 mm)|
|Rim diameter||.275 in (7.0 mm)|
|Case length||.714 in (18.1 mm)|
|Overall length||1.00 in (25 mm)|
|Source(s): Hornady |
The .17 Hornady Mach 2, or .17 HM2, is a rimfire cartridge introduced in 2004 by the ammunition manufacturer Hornady, following the successful launch in 2002 of the .17 HMR. The .17 HM2 is based on the .22 Long Rifle "Stinger" case, necked down to .17 caliber (4.5 mm) and using a bullet weighing less than half the weight of a typical .22 Long Rifle bullet.
This section does not cite any sources. (December 2016) (Learn how and when to remove this template message)
The weight of the bullet is a key part of achieving the very-high velocity for a rimfire round. It weighs only 17 grains (1.10 g) vs 30-40 grains (1.94-2.59 g) of a typical .22 LR bullet. The .17 HM2 may or may not live up to its "Mach 2" name, depending on geographic location and conditions, with velocities out of a rifle of 2,100 ft/s (640 m/s). The velocity is nearly double that of a standard .22 LR, which results in a much flatter trajectory out to its 175-yard (160 m) effective range.
Since the .17 HM2 is based on the .22 LR, converting most bolt action firearms chambered in .22 LR to .17 HM2 requires only a barrel change. The higher pressure makes conversion of semi-automatic firearms more difficult, as virtually all are blowback designs that are sensitive to pressure changes. Kits for the Ruger 10/22 and AR-15 have appeared, and they replace the factory bolt or bolt handle with a heavier one to increase the bolt mass and compensate for the higher pressure.
- List of handgun cartridges
- List of rifle cartridges
- Table of handgun and rifle cartridges
- 4 mm caliber
- .17 Rimfire
- "The .17 HM2" by Chuck Hawks
|Wikimedia Commons has media related to .17 HM2.|